How to set up a JBL column

The JBL wireless speaker has recently gained real popularity. Users, especially of school age, can be met almost everywhere with a gadget in their hands. After all, the device is not very expensive, and when there will still be a chance to please those around you with your favorite audio compositions. Well, the rest will come in handy too. Listen to music in a tight circle, up to and including the forest glade, on the beach, on a hike, on a city street - this is an advantage. With only a smartphone or tablet, you can organize a real disco away from concert halls and disco clubs.

JBL speaker connection features

The JBL column has been purchased, it remains only to connect it and actively use it for its intended purpose. It should be noted that this is a very simple process for mobile devices running the Android operating system and the iOS operating system. But a number of specific actions in order to use the device is necessary, and you need to clearly know how to do it. In order not to search for information in a hurry.

Keep in mind that you can connect speakers using Bluetooth wireless technology, but not only with it.

The first step is to press the power button on the column. It must be held down until a specific signal sounds, indicating that the device is turned on.

Bluetooth JBL speaker instructions

How to connect external speakers JBL via Bluetooth in practice? By the way, it should be noted that this is a very good way to connect, with its implementation no cables, connectors, plugs or other interface elements are required.

To some extent, the signal may be worse than with a wired connection, but not so much as to sacrifice such a convenient way to connect. Yes, and just a smartphone, hung with various devices, it is banal inconvenient to use.

So, in order to still get the opportunity to enjoy audio compositions, having only one smartphone, you should find a table, not far from power outlets. Put mobile devices next to each other. On both gadgets, you must run the Bluetooth adapter. In order to carry out this process without problems on the column, you must press the appropriate button and hold it again until the characteristic signal, as when turning on the column itself. When a flashing red and blue appears around the button - that's it, it's ready to go.

How to set up a JBL Charge 3 speaker

Now it's time to set up your smartphone (tablet, other device).

1. In Android gadgets you need to go to the settings page. Typically, the tab with the connection and Bluetooth settings is located at the top of the page.
2. Next, use “Search for devices", select the column and confirm the connection.
3. That's it, the settings are over, the connection is ready to work.
4. If it unexpectedly turns off, you just need to repeat all the above settings.

Connection via AUX. To implement it, you need a 3.5 mm cable, usually on smartphones and tablets used to connect headphones.

1. In this case, almost no settings are needed.
2. Plug in, adjust the sound and listen to music.
3. But then again, the device will be hung with wires.

In addition to the 3.5 mm jack, there are other, newer ones. For example, on devices the latest versions with iOS.

The latter are still far less common than Android devices, since they are installed almost exclusively on Apple’s mobile devices.

Be sure to pay attention to several important points. If you cannot connect and configure external speakers, the problem may be the failure of the operating system. If there is no relevant experience, it is better to entrust the flashing to specialists from service centers.

If you try to do a flashing yourself, you can disable the system, and then bringing it into working condition will take much longer than originally planned. Specialists, especially certified ones, have much more opportunities to fix the gadget, as they have special knowledge and work on specialized equipment.