How to turn on the TV without a remote control

It is difficult to imagine controlling a TV without a special remote control. This thing allows you to quickly and easily change channels, speed, sound and set other settings. However, there are situations in which there is a need to control equipment without a remote control.

Can I turn on the TV without a remote control?

In conditions when the power button on the TV remote does not work, the question arises of connecting it in another way. If we consider the Soviet model, then on the front of the case you can see many control buttons. As a rule, they were large and had tips in the form of inscriptions. There were practically no difficulties with setting up the equipment.

Many people mistakenly believe that modern models cannot be turned on without using a remote control. TVs are thin panels with a trim in the form of a thin frame. This is explained by the fact that many manufacturers are striving for minimalism by hiding the coveted buttons behind the back wall or on the side.

ATTENTION. It should be understood that there is not a single TV device in which there would be no manual control.

How to switch TV without remote control

So, wondering how to switch the receiver without a remote control, the first thing to do is find the keys on the panel of the case. To do this, it should be carefully examined. So, manufacturers Toshiba and Phillips place buttons on the left side of the products. In Bravia and Panasonic they can be found, on the contrary, already on the right side. But Sony, Samsung and LG have buttons on the back of the device. You should know that the location of the main buttons depends on the specific modification of the TV.

IMPORTANT. Each TV must have a manual for proper operation, in which you can find the main points for managing the product.

Standard notation

The names of the TV buttons, regardless of manufacturer and model, will in most cases be the same. Consider the main sets of keys:

• POWER This main button will help turn the device on or off. In most cases, it is slightly different in configuration from the rest and is located separately.
• . By clicking on these symbols, you can switch channels or menu sections.
• + and -. These keys add and reduce sound.
• MENU Allows you to enable the device menu and select the necessary parameters. In some versions, it also serves as a key to load and turn off the device.
• OK Confirms the selected action.
• AV. Used to select the mode in which additional devices can be used. In some products, the mode is activated independently and this button may not be.

How to turn on the TV without remote control and buttons

HUAYU has released a multifunctional development. This is a special control panel that is suitable for most TVs, set-top boxes, audio systems and other devices. It includes the encoding of almost all world brands. Therefore, many experts recommend having such a device in every home. Products from BILAIN and SUPRA are also gaining distribution.

Channel switching

After the device is turned on, you should deal with switching channels. Usually, immediately after turning on the device, the program starts showing the channel on which it was disconnected or which was indicated in the settings. To do this, use the keys. By clicking on them, the channels will change in ascending or descending order. In the absence of such designations, it is necessary to find + or - and use the general menu. In the special section, you should find the channel switching function and start searching for the desired one.

Setting up without a remote

There are televisions that have one large button that looks like a joystick. They are easy to control by pressing the center button. Consider the features of working with the joystick as an example of adjusting the contrast:

1. First you need to open the general menu with a simple click on the joystick in the center for a couple of seconds.
2. Next, a table of contents should appear on the monitor listing the available parameters, among which you should select the one you need.
3. In this example, select the "contrast" button by pressing the joystick buttons up or down. Then we fix this function by pressing in the center.
4. Change the contrast using the left and right keys. The selected parameters are also saved by pressing the center.
5. To close the menu, hold the center button for several seconds.

This principle is relevant when configuring various parameters and functions. Manually, you can configure a specific sequence of channels so that in the future they can be quickly found. To do this, select the "Channel Settings" item and click on the "Manual Settings" subsection. In the "Programs" section, each channel can be assigned its own specific number. You can also adjust the sound characteristics and color of the region. Further, the found channels are stored in the device’s memory, and in order to find additional ones, they perform all the above actions again.

Controlling a TV using a smartphone

Thanks to modern developments, it became possible to control technology using gadgets. To do this, a special program corresponding to the TV model is downloaded to the mobile device. The Google Play platform offers a wide variety of applications for various models of technology. The TV must have certain parameters:

• Connection via Etnernet (RG-45);
• Ability to connect via Wi-Fi;
• Option "Remote Control";
• Option "SmartTV" or "InternetTV".

REFERENCE. The mobile device and the TV must be connected to the same network. For a phone, it can be a Wi-Fi network, and for a television set, a wired LAN connection.

The remote control is a unique development that makes life easier for the average lover of television shows. Having lost this device due to breakage or loss, you definitely should not panic. After all, you can turn on the TV, and also control it without using the remote control. We hope that this article will be useful and will help you understand the intricacies of turning on the TV.