Why electronic scales show different weight

Today, being slim is not just fashionable, it is already a way of life for many people. Of course, weights are indispensable. Few people use mechanical devices, since electronic models are relatively inexpensive, and the accuracy of the readings is higher.

But there is one problem, often electronic options show different meanings. Let's understand the possible reasons?

Reasons why electronic scales show the wrong weight

Why the display may show a different weight:

• Uneven surface under the device. Electronic models are very sensitive devices, therefore, if they stagger when standing on them, it means that the surface under them is uneven, and you should look for another place for them in the apartment;
• Clogging. If the device is used for a long time and is stored without a box on the floor, it could clog banally. It is necessary to disassemble it and carefully clean all the elements with a brush with soft bristles;
• Failure in work. This problem may be caused by a violation of the weighing rules. The recommendations that should be followed when weighing are given below.

How to fix the problem

What to do: electronic scales do not show weight correctly? If none of the above reasons fits, then maybe they are broken. The failure may be as follows:

1. The batteries have exhausted their resource.
2. The connecting cable moves away - this is the element connecting the electronic board and the display, in case of a malfunction it will distort the data. The board should be pressed closer to the display.
3. The relay is faulty, for example, the contacts have thinned.
4. The mechanism is damaged due to exceeding the permissible weight or incorrect use of the device.
5. Incorrect calibration also leads to data corruption.

Why do electronic scales show different weights? New models must be calibrated at the factory. Many models include automatic calibration. However, the accuracy of measurements may be impaired if they are raised several times in a row or often moved.

In this case, you can calibrate yourself. Methods for calibrating the scales can be found in the instructions for the device, and for this you do not need any special skills.

Do electronic scales show different weights, even though they are in good condition and do not need to be cleaned or calibrated? Then follow these guidelines when taking measurements:

1. It is only necessary to place the scales on a flat, solid surface, and always take measurements in the same place.
2. During measurement, it is important to stand on the instrument correctly. Feet should be placed parallel to each other. They should not move to the edges or hang from the surface of the balance. You must stand still and calm. Do not lean against a wall or other furniture.
3. All nutritionists recommend weighing themselves in the morning on an empty stomach, without shoes and in a minimum amount of clothing. Weight may change daily for a larger side due to the amount of food eaten and the fluid you drink.

Rules for the use of electronic scales

In order for the electric scales to last for a long time, you can not:

• Expose them to temperature changes;
• Wash them under running water;
• Shake or drop sharply;
• Put the device in direct sunlight;
• To bring scales to heating (heating) devices;
• Use chemicals to clean.

Important! If you excluded all the problems described in the article, then, most likely, the scales need repair, and they have a direct road to the master!